DOW FILMTEC™ SW30HRLE-400 Industrial RO Membranes # ไส้กรองเมมเบรน สำหรับอุตสาหกรรม 7,500 แกลอนต่อวัน (GPD)

DOW FILMTEC™ SW30HRLE-400 High Rejection High Flux Seawater Desalination RO Elements

DOW FILMTEC SW30HRLE-400 Elements offer rejection and low total cost of water for seawater desalination. The FILMTEC SW30HRLE-400 delivers high performance over the operating lifetime without the use of oxidative post-treatments and provides high NaCl and boron rejection to help meet World Health Organization (WHO) and other drinking water standards.

DOW FILMTEC Seawater Reverse Osmosis 8" Elements separate salts from water and are designed to reduce capital and operational costs of large desalination systems that produce greater than approximately 10 gpm (2300 L/h) of permeate. FilmTec Seawater RO products combine excellent membrane quality with automated precision fabrication, taking system performance to unprecedented levels.

BENEFITS OF DOW FILMTEC MARINE RO MEMBRANES:

    @ High flux reduces energy use or pressure required
    @ High salt rejection results in good quality water
    @ High boron rejection
    @ FilmTec performance and quality

SPECIFICATIONS FOR SW30HRLE-400

Permeate flow and salt rejection based:  32,000 ppm NaCl feed stream, 5ppm boron, 77°F, 8% recovery, 800 psig, pH 8.

OPERATING LIMITS FOR SW30HRLE-400

*Maximum temperature for continuous operation above pH 10 is 95°F
**Refer to cleaning guidelines.
***Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure.

Typical Applications
+ Seawater Desalination
+ Municipal Drinking Water
+ Industrial Desalination
+ Resorts
+ Navy
+ Off-Shore Platforms
+ Portable Systems for Military Operation
+ Wide Variety of Other Marine Applications